worm motor

Worm drive gearbox with motor
A robust worm-drive gearbox powered by an MM28 motor. Ideal applications where an easy to match, high torque output is required. Ideal for student based projects which includes robots and buggies.
The unit has been designed to ensure that the output shaft could be ‘clicked’ in and out for modification. E.g. reducing to size. The electric motor is snap fitted into its cradle to engage the apparatus and worm.
Details
1 – 6V DC
0.1A to 1A depending on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
General dimensions of box + engine: 35(W) x 40(H) x 60(L)mm
The primary feature of this high-efficiency gear box is a worm gear, which locks the output shaft whenever the motor is not turning. The high gear ratios of 216:1 or 336:1 make this gearbox appropriate for small walking robots, lifting mechanisms, and various other applications where high torque is usually desired.
The low-voltage motors in the worm gearbox operate on 1.5-4.5 volts and draw up to some amps, making them perfect applicants for the DRV8833 motor driver carrier. Engine overheating can be caused by excessive stalling, even at very low voltages. We recommend that you utilize stall-detection sensors, or simply watch your robot, to make sure that it doesn’t stall for more than a few seconds at the same time.
This gearbox includes a 4 mm diameter, round output shaft, which works together with the wheels that are compatible with Tamiya 4 mm, round shafts. Our 3 mm universal mounting hub also fits on the smaller threaded end of the shaft, though it is not particularly designed to work with this type of shaft (the hub’s set screw could damage the thread on the shaft).
Ever-Power gear motors are economical, right-angle, worm-worm motor geared motors that install easily in the tightest applications. Economical right angle worm geared motors established new criteria for reliability, efficiency and economy with unparalleled features which includes hollow shafts in the tiniest sizes. An inverter friendly design provides for easy integration now and a really future proof remedy. The Ever-Power gear electric motor offers total versatility in mounting choices includes shaft, base, face, and flange solutions. The electric motor terminal box can be mounted in alternative positions rotated in 90º steps around the motor frame providing for unparalleled integration options.
Ever-Power gear motors comply with North American and International criteria, including NEMA, IEC, CSA, and CE, the Ever-Power series permits worldwide acceptance, a true total remedy for our global clients.
Superior protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dirt tight and hose proof,and can be utilized outdoors or in wet and dusty environments without the usage of additional enclosures. Full rated output is offered by the output shaft of the unit.
Product Features
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change 1st after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Additional features:
Connecting with Connect connectors.
With included inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to EN 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm equipment motors are the alternative for applications requiring a corner turn, optional dual result, or an inability for the engine to be back again driven. The DC right angle equipment motors are made for continuous and intermittent duty procedure. Our right angle gear reducers are designed with a number of mounting plate options, making them perfect for a variety of DC motor based applications. We offer 12 ratios which range from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Standard brush life of 2000+ hours (varies by application)
EP Products Worm Equipment Motors are designed to generate high torque in a small package size. Worm Gear Motors are great for applications that want a self- locking or breaking feature because the result shaft can’t rotate when there’s no power used. Additionally, Worm Gearheads can transfer motion in 90 degrees. With various decrease ratios, precision cut gears, voltages and sizes, EP Products has a DC Worm Equipment Motor solution for the application.
Features and Benefits
Very High Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Ability to Handle Large Gear Reduction Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Protection Door Locks / Industrial Conveying Systems / Security Gates / Dental care Chair / Ambulance Cots & Stretchers Many of our DC Motors can be complimented with one of our Worm Gearheads. EP Products will work with you to design and produce a Worm Gear Engine that may optimize the overall performance of your unique application.
Built to your unique requirements
Motor Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Cut / Round / Splined / Other)
Overall Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Extra Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm motor runs on the metal gear box for durability and a high torque output. Because of the special mechanical framework of the worm drive the electric motor output shaft is self locking and may not be rotated.
This part uses a two wire connection and supports direction control in addition to PWM speed control. Rated voltage is 12v and will obtain 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Rated Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear units from EP DRIVESYSTEMS especially display their power in applications where high equipment ratios are essential. Our worm geared motors are as a result optimally suited for make use of in intralogistics, packaging technology and the food & beverage industry.
Four great reasons for EP worm geared motors:
Rugged
Our worm geared motors have a high overload capacity
Maintenance Friendly
Washdown versions enable simple and efficient cleaning of the drive system.
Corrosion protection
The NSD tupH sealed surface area conversion is exceptionally chemical substance, corrosion and abrasion resistant.
Flexibility
Our modular style give users optimum freedom.
The modular system for maximum flexibility: Our EP worm gear units
There are numerous applications that require drive systems, and each one of these has its unique requirements. The EP series worm equipment motors could be quickly and effectively adapted to fulfill your needs.
Worm gear systems impress with their high power density and compact style. If required, we are able to also supply them with the impressive nsd tupH surface treatment.
As well as the basic EP housing, we offer an extensive type of bolt-on parts to customize the merchandise including torque arms, shaft covers and output flanges. These can be very easily field installed, but we may also be happy to assemble the average person components for you.
Discover more about the modular SI worm geared motors!
Find out more
Clean and Clean: The EP worm equipment unit SMI
SMI worm gear models feature a smooth, corrosion-resistant alluminum alloy housing. Optional nsd tupH surface conversion makes the product ideally suited for severe and demanding industries like food processing and pharmaceuticals.
Flexible input designs such as for example NEMA, IEC or immediate motor mounts in additional foot or flange mounted housing designs.
Worm geared motors
Worm geared motors for little power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared motor program. The units have on all sides different fixing possibilities and enable an easy assembling for the client.
Other drive configurationscan be designed by use of built-on components (e.g. torque arm and output flanges). The housings are created in light weight building out of aluminium die cast. Electric motor attachment is realised in general by way of IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:result shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm
Buy Worm Drive Gearbox with Electric motor – incorporating the following features: 1 to 6V voltage ranking, 17100 rpm simply no load velocity, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm wide, 40mm high, a robust worm drive gearbox powered by an MM28 electric motor (included), most ideal for applications where an easy to match, high torque result is required, nylon housing and gear, requires light essential oil or silicon grease lubrication, ideal for student based tasks including robots and buggies.
Most ideal for applications where an easy to fit, high torque output is required
Ideal for student based projects including robots and buggies
Reversible High torque Turbo Worm Gear Motor JGY370 DC 12V 40RPM
Reversible High torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
Features:
The electric motor is Gear DC motor with micro-turbine worm, you can transform the wiring-connection to change motor rotation.
Turbo worm geared electric motor with self-lock, that is, regarding motor without electric, the output axis is fixed, self-lock.
The reducer output shaft arranged vertically with the motor shaft, whole engine output shaft relatively-short than general gear motor, trusted to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Result torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the window, door, Mini winch. Ect.
In sumo robot or combat robot competition where high holding torque’s motor is essential to avoid your robot being pushed by your opponent robot. The worm equipment is certainly a better option when compared to spur gear motor. Why is worm gear so unique? Check this wiki out: Worm Drive.
“Unlike with ordinary gear trains, the path of transmission (insight shaft vs result shaft) is not reversible when using large reduction ratios, due to the greater friction involved between the worm and worm-wheel, when usually an individual start (a single spiral) worm is used. This can be an advantage when it’s desired to remove any possibility of the output driving the input.”
In other words, it is tough to push your load (example, your robot) if the motor is not power or rotate.
Features and Spec:
Metal gear box
Result shaft is self-locking because of the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g