These worm equipment screw jacks are extremely precision and reliability, it can meet all the necessary security, cost-efficiency, and strength mandates of the application. High strength bronze worm gear is used, the payloads from 0.5T to 100T . A total of 11 sizes can be found, each in a vacationing nut version and a basic version.

Worm equipment drive screw jack
Translating(traveling screw) and rotating (traveling nut) configurations
Electric Driven and Manual Operated both can be found
Trapezoidal spindle (self-locking) and Ball Screw spindle (high efficiency) version
Design option: Standard, Anti-rotation, Anti-backlash or Protection nut
Standard and custom end fittings, installation options, and drive shaft
Worm Equipment Screw Jack systems are ruggedly designed and Worm Gear Jack stated in standard versions with load handling capacities from 1/4 ton to 100 tons. They may be used individually or in multiple arrangements. There are no “standard” travel lengths and all Worm Gear Screw Jack systems are designed to specification.
The jack housings are made of ductile iron and proportioned to support the rated capacity of the machine. MJ, 1/4 ton, and 1/2 ton models have aluminum housings.

Each Worm Gear Screw Jack incorporates an alloy steel worm which drives a higher strength bronze worm gear (drive sleeve). The worm shaft is supported on antifriction tapered roller bearings with exterior seals provided to prevent loss of lubrication (sealed radial bearings on the MJ, 1/4 , 1/2, and 1 ton models). The drive sleeve is supported on antifriction tapered roller or ball thrust bearings. Rotation of the drive sleeve causes the lifting screw to translate or rotate, depending upon jack configuration.
The Inch and Metric Worm Gear Machine Screw Jacks incorporate an alloy or stainless worm which drives a high strength bronze worm gear (drive sleeve). The worm shaft is backed on anti-friction tapered roller bearings with exterior seals provided to prevent loss of lubrication. The drive sleeve is definitely supported on anti-friction tapered roller or ball thrust bearings. Rotation of the drive sleeve causes the thread lifting screw to translate or rotate, depending upon jack configuration.

The threads are precision formed, typically using Class 2-C (Centralizing) tolerances. Jack lift shaft business lead tolerance is approximately ±0.004″ per foot.