EP 700 Series STAINLESS Worm Gear Rate Reducers | Ever-Power Gear
THE INITIAL Stainless Reducer
The Ever-Power Gear 700 Series Worm Gear Rate Reducer is a foundation in food and beverage applications for decades. As a innovator in worm equipment technology, Ever-Power Equipment continues to improve product functionality by developing innovative designs to meet up more stringent demands and anticipated tightening of federal regulations in the food and beverage industry.
Blending trusted 700 Series worm gearing with an innovative new exterior style, the stainless 700 series has been optimized to withstand the harshest washdown conditions. The units feature trusted 700 Series worm gearing, a 316 stainless rounded housing with smooth uninterrupted areas made to prevent particle accumulation and pooling fluids, double lipped shaft seals, covers for all hardware and counter bored holes.
NSF Certified Logo
Sure, a stainless gearbox costs greater than a painted one, but investing in a more corrosion resistant gearbox saves money and makes the most sense over time. Unmatched product performance in highly caustic washdown applications combined with first class customer service makes Ever-Power Gear your 1st choice for swiftness reducers and gearmotors!
NSF International Certified
316 stainless steel casing, bearing carriers and flanges
303 stainless steel output shafts
Rounded housing eliminates practically all smooth surfaces and prevents international matter accumulation or standing fluid
Elimination of all exposed hardware promotes even surfaces to optimize wash down effectiveness
Lubed forever with H1 rated meals grade lubricant Klubersynth UH1 6-460
Flange style incorporates jack bolt holes to facilitate easy motor-reducer separation
5:1 – 100:1 Single Reduction
100:1 – 3600:1 – Double Reduction
Motor flange style incorporates an O-ring to reduce ingress of particles or fluids
Polished matte complete maintains clean appearance throughout operation
Optional high pressure washdown seal available
Available in hollow and solid result shaft
Stainless Steel, Heavy-duty Right angle (SSHdR) series worm gearboxes are created with 304 stainless. All reducer surfaces are polished and rounded to avoid organism growth on surfaces. SSHdR series Hollow Output Bore reducers are available in speed ratios which range from 5:1 to 60:1 with imperial center distances which range from 1.75 to 3.25 inches. Also, our stainless steel gearboxes come pre-loaded with EP food grade lubricant.
“EP” series Flange Insight – Hollow Bore Output series stainless steel correct angle worm gear reducers are stocked as finished goods with hollow output bore sizes ranging from 1” to 2-3/16” with obtainable center distances ranging from 1.75 to 3.25 inches. All motor insight flanges are NEMA C-face quill style styles and each unit is sold pre-filled with EP food grade lubricant. Stainless Steel bushing kits can be purchased separately to allow for a lot more head shaft size configurations.
5:1 – 60:1 ratios
Center distances which range from 1.75 to 3.25 inches
304 stainless steel housing, covers and flanges
Smooth, polished surfaces and etched nameplate
Internal bladder functions as a breather and effectively dispels heat
Double-lipped VITON oil seals (at output)
15CrMo4 NEMA quill insight with carburizing heat therapy
CuSn12Ni2 bronze alloy worm wheel with high efficiency equipment tooth configuration
RoHS plastic covers supplied to fill unused mounting slots
0-ring provided on input flange to prevent moisture intrusion
Pre-stuffed with Mobil CIBUS 460 H1 food grade lubricant
Interchangeability with major brands
STAINLESS (SS Series)
Grove Gear Stainless Steel gear reducers offer superior corrosion safety. They are rust evidence and in a position to withstand the harshest conditions. The stainless steel housing, cover and external hardware offer an exceedingly long life.
Center distances from 1.33” through 3.250”.
Six sizes available with ratings to 17 HP.
Obtainable in single and dual reduction.
Ratios from 5:1 to 3600:1.
316 stainless steel housing and covers to withstand extreme environments.
Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant
Vent-free “sealed-for-life” design with Enviroseal technology.
EP double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
O-ring on encounter of input flange provides a positive seal against moisture intrusion.
303 stainless steel output shaft.
Worms are cut, heat-treated, surface and polished to supply efficient, quiet operation.
All units are 100% run and leak tested at the factory to insure you get the best quality product.
Ultimate application flexibility with all-angle installation provisions, the widest selection of item bases and flanges and the largest selection of stock reducer styles.
Mounting dimensions are interchangeable with most industry standard reducers.
EP Stainless Steel
Right Angle / Heavy Washdown Duty Stainless Steel Speed Reducer
This Stainless Steel reducer is made for Heavy Duty Washdown applications and is resistant to numerous forms of wear. This is exactly what you need to use for serious environmental conditions.
STAINLESS STEEL WORM GEARBOX
Comply with HACCP and EHEDG regulations
It is becoming more and more difficult to really get your machine to meet up the HACCP and EHEDG regulations, while your visitors vulue this a lot more. The stainless worm gearbox drive plan Ever-Power enables you to stay affordable but satisfy tcustomer demants.
The Ever-Power stainless steel worm gearbox types are created to meet the guidelines. Consequently, they are resistant to a thorough cleaning regime, is made from hygienic components and are also dead places, and horizontal surfaces as much as possible, avoided. Of course, the material of these products is stainless.
Output torques of 40Nm up to 160Nm.
Output shaft sizes of 18mm up to 25mm.
Input flanges 63B14a up to 90B5.
Reduction ratios of i=7,5 up to i=100.
Food grade oil, food grade seals and hygienic design.
Material worm wheel: Cu bronze SN12 Ni2 (UNI7013-10), materials hardened steel worm shaft and ground profile ZI (UNI4760).
Belastingscapacitieiten conformity: ISO.14521, DIN.3996, BS 721, AGMA 6034, ISO 6336, DIN 3990, DIN 743, ISO 281.
STAINLESS STEEL WORM GEAR SPEED REDUCERS
◦ Right angle worm gearbox
◦ Ratio 5:1 to 60:1
◦ Size 206 to 325 (2.06″ to 3.25″ between input and output shaft)
◦ Created for heavy-duty washdown
◦ Rust free casing, flange, and shafts are ideal for food industry
◦ Ideal for tough environments and corrosive applications
◦ Internal bladder adjusts to temperature and pressure – No dependence on a surface breather
◦ Heat-treated steel worm shaft w/ floor thread
◦ Light weight aluminum bronze (ALBC3) worm wheel
◦ Polished matte finish
◦ High quality double lip oil seals
◦ Input flange O-ring repels external moisture
◦ USDA H1 food grade lubricant : MOBIL SHC CIBUS 460
◦ Appropriate for 56C, 145TC and 182/4TC Engine Inputs
◦ Twelve months limited warranty
Ever-Power Stainless Steel S Series right-angle worm reducer is perfect for harsh washdown conditions in food processing or other applications with high temperature/high pressure sprays. The S Series comes standard given synthetic oil for life time lubrication and is comprised of a stainless steel housing that is made for safety in washdown applications, also designed for multiple mounting configurations.
Hygienic stainless BJ worm gearboxes
Ever-Power offers a self-produced stainless gearbox selection of high quality. The series was developed specifically for the food industry and other industries where there are continually stringent requirements for the level of resistance of the material and the easy-to-clean design.
The gearboxes are made from a smooth stainless gear housing, they are lifestyle lubricated and can of course be given oil approved for the meals industry. Oil seals are standard made of nitrile rubber.
To reduce the chance of bacterial development, the look is characterised simply by smooth machined areas without unnecessary flanges, recesses and installation holes. Additionally it is possible to order the gearboxes with torque arm, side flange, totally free worm and plug-in shaft. Other adjustments are performed on ask for including such as stainless spindle gears.
In instances where you will want complete hygienic gear electric motor, we will offer the EP-gearboxes fitted with stainless AC or servo motor.
Resistant to cleaning with water under pressure
The protection of the gearboxes is IP65, and for stainless motors it is IP66. This means that the products could be cleaned with drinking water under pressure from all directions. To accomplish a standard protection of IP66 by assembly of gearboxes and electric motor, you must use a gasket of nitrile rubber for the joint. This implies that the apparatus motors are perfect for free mounting without a traditional stainless basic safety cover in areas where hygiene requirements are highest. Hidden sources of pollution can thereby be avoided.
The gearboxes are as standard given a center distance of 31, 42, 61 and 99 mm with gear ratios from 5:1 to 100:1 and with an output torque as high as 900 Nm.
Stainless steel worm gearbox
Maximum output torque
5:1 – 75:1
5.4:1 – 75:1
7:1 – 100:1
7:1 – 60:1
7:1 – 100:1
Item selection brochures available below:
Full Integral Horsepower Product Catalog
Worm Product Selection Table
S 45 Series – 0.25 – 1HP, 97 – 450in-lbs, 17.2 – stainless steel worm reducers 250RPM
S 50 Series – 0.25 – 2HP, 199 – 567in-lbs, 17.5 – 250 RPM
S 63 Series – 0.25 – 2HP, 209 – 1199in-lbs, 18.6 – 250RPM
S 85 Series – 0.5 – 5HP, 666 – 2353in-lbs, 18.2 – 250RPM
Extra flange and shaft inserts offered and may be requested during product selection. To order, please get in touch with Bison at 1.800.ATBISON (282.4766) and ask to talk with an Automation Specialist. Online selection and ordering coming soon!
Stainless Steel Solutions
Powerful, Clean Solutions with a Stainless Reputation.
Ever-Power Drive’s stainless steel precision movement gearboxes are made for sterile manufacturing environments. The product’s smooth surface and curved contour allows for easy cleaning and bacteria-free surfaces, ideal for meals processing and pharmaceutical applications. The product is designed and ranked to IP69k providing maximum protection against contaminant ingress and also leak free operation.
Catalogued models of Ever-Power Gear’s well-known stainless steel 700 Series speed reducers are now available with standard 2-day delivery. Process improvements possess yielded the industry’s best standard business lead time for stainless worm gear reducers.
Ever-Power Gear’s SS700 Series, the original “domed crown” stainless reducers, are created for maximum corrosion level of resistance and superior performance in high-pressure food processing and packaging washdown applications.
A convenient after hours/holiday hotline can be available for emergency orders. Catalogued SS700 Series versions are stocked at local and regional distribution centers to make sure fast delivery.
All SS700 models are NSF Authorized and also have many maintenance-friendly features including electropolished exterior finish, sealed electric motor flange, and covered hardware. To avoid miniscule niches that can host microbial contamination, the nameplate provides been laser marked to provide a smooth uninterrupted surface area. A large internal essential oil reservoir, filled with H1 food-grade lubricant (Klubersynth UH 1 6-460) and sealed forever, allows for an array of operating temps and extended service life.
EP 700 Series STAINLESS Worm Gear Rate Reducers | Ever-Power Gear