Additional Features:
Made of Steel
For use with cast iron bushed bore pulley
This U1 Bushing with 5-1/2″ bore is a high-quality precision product that’s built for durability and strength. U1 bushings are used in an extensively broad range of applications, which includes; sprockets, shaves, pulleys, gears, plus much more, we likewise offer most of these products. What models this bushing apart may be the high-quality steel development along with specific manufacturing and top quality control; this ensures that you always get yourself a premium quality constant product. What really sets us apart from the other men is our experienced expert workers and our company-wide objective of customer satisfaction.
1. Be sure the tapered cone surfaces of the bushing and the within of the driven item are clean and free of anti-seize lubricants.
2. Place the bushing in sprocket or different part type that accepts the bushing.
3. Place cap screws loosely in pull-up holes. The bushing remains loose to assure sliding match on shaft.
4. With major on shaft, slide the sprocket or other part type to the desired position on the shaft. Be sure to keep the heads of the cap screws attainable.
5. Align the sprocket or portion type, tighten the screws on the other hand and progressively until they will be pulled up tight. Usually do not apply extensions on the wrench handles and do not allow the sprocket or portion to become drawn i connection with flange of bushing. At this time there should be a gap between your bushing flange and sprocket, make certain this gap does not close.
Twice split barrel ensures concentricity
Grips the shaft with confident clamp fit
High torque carrying capacity
Permits blind assembly
Load not carried or limited by mounting screws
External key on most sizes for confident drive and greater torque carrying capabilities
Double-split barrel for great clamping
Solid flange to keep up concentric bores
Available in inch, metric, and spline bores. Bore range from 3/8″ to 10″
Solid Flange & Dual Split Barrel – Assures better concentricity to the shaft.
Key to Key Drive – With keys upon both the shaft and item to supply the strongest possible drive.
3/4″ per Foot Taper on Barrel – Personal locking taper provides the highest amount of mechanical locking product to product.

Taper bushing are widely used as well as sprockets, v-belt pulleys, timing pulleys, coupling and other mechanical parts with taper bore connections.
Taper bushing series are made from high quality engineered components with superb tolerance. The feature is easy to work with and needs no added alteration. These bushings can fit almost all sorts of assemblies and sizes. They will be the best choice in style for mechanical connections.
To complete designations put bore size. For instance: PD1215X16MM designates a 1215 taper bushing with a 16mm bore.
No costly re-boring: total range of both metric and imperial readily available.
Standard range suits up to 125mm/5″ shafts & Hub diameter required depends on the application.
Complete short reach range obtainable, for compact light and portable assemblies & Clean, Compact Style.
Ease of installation and removal.
This Split Taper Bushing is designed exclusively for use with cast iron bushed bore pulleys and can be purchased on a single page as the pulley you will need.
For use with 1 3/16” shaft sizes.
Comes with 2 set screws.