WORM SERVO GEAR REDUCER
Features
Wide variety of servo gearboxes, made to fit virtually all servo motors found on the market
Designed for the best torsional stiffness and the cheapest angular backlash, designed for the maximum torque and overhung loads
Bush with slot machine games and hub clamp for servomotor coupling
Benefits
Enhanced dimensional compactness because of direct servomotor coupling
Widest range of feasible servomotors coupling dimensions.
The correct technical solution because of a comprehensive range of sizes, gear stages, transmission ratios, designs and nonstandard designs.
Catalogs:
Servo equipment reducers (worm, coaxial, helical and bevel helical devices) Catalog SR
Operating instructions:
Operating instructions for equipment reducers and gearmotors (UTD.045)
EP Drive Systems, Inc. is very happy to announce the growth of our range of Servo Reducers, at this point offering five degrees of precision to meet up any application requirements. The five degrees of precision obtainable allows a machine developer to select the required reducer precision to meet their needs and their spending budget. They can be purchased in both in-series and right-angle versions, in torques up to 7,376 lb.ft. and ratios to 3,392:1.
Standard applications for these reducers include rotary & linear axis drives, and materials handling axis drives. Industries offered include Material Managing, Automation, Aerospace, Machine Tool and Robotics.
The mounting faces of the HT, HP, Electronic and B versions are identical, which makes it possible to interchange a unit with a higher or lower accuracy unit if needed.
A wide range of engine couplings and installation flanges are available for the entire reducer range to mount virtually any servo motor and the hollow bore output can be used to mount output shafts, pinion shafts, or other drive components.
These reducers are usually selected predicated on the peak cycle forces, which usually happen during accelerations and decelerations. These routine forces rely on the driven load, the speed vs. time profile for the routine, and any other external forces functioning on the axis. For more selection info, please follow this PDF link.
For application & selection assistance, please call, fax or email us. The application information will be reviewed by our engineers, who’ll recommend the best solution for your application.
EP Inc. provides a full selection of modular servo gearboxes /worm reducers. The modular design permits configurations with motor insight flange and output pinion for rack and pinion drives, along with solid result shafts, Hollow bore output, and insight shafts for all other positioning applications. The modular style allows for universal installation of the gearbox in any orientation.
They can be utilized on motors with a NEMA23 standard flange through an adaptor kit. As the gears are naturally angled, they result in a short total amount of the motor and its gear.
The series may also be delivered both right- and left-angled and with output shafts on both sides. A 30-mm machine recess for centering and a 4 M5 threaded mounting hole can also be built on the gear’s output side.
Built with a straightforward and robust style, the series has gearing ratios that range between 6:1 to 75:1. The user may also customize the materials through the order, in order to match the apparatus to its intended program.
The Precision Planetary Gears of the EPRG series contains a comprehensive selection of low backlash planetary gearboxes, with up to class 3′ precision, obtainable in several gear frame sizes, with single or multiple stage reduction (for gear ratios from 1:3 to at least one 1:1,000). These models likewise incorporate versions with double shaft, right angle shaft and right angle output, as well as a full range of adapters for electric motor mounting, making them capable of meeting the requirements of also the most diverse applications. They are designed for use with built-in servo and stepper EP motors, mounted directly or via adaptor flanges, but can also be used in combination with other EP motor types. This selection of products is founded on years of experience and represents the end result of a decade-long analysis aimed at improving performance.
Maximum precision and dynamics, coupled with excellent torque density, are the key requirements specified for reliable servo gearboxes used. EP provides servo gearboxes for any program and any functionality range. Our low-backlash planetary and right-angle gearboxes reflect our interest for development and the best levels of precision.
Worm gear reducers provide market progress solution with efficiency and flexibility. Low quantity of basic models can be applied to a wide selection of power ratings guaranteeing top performance and decrease ratios from 5 to 1000.
Gear reducers and servo gearboxes of EP Precision Machinery Co., Ltd. are created for high-performance mechanical devices. When the motor swiftness must be reduced, the result torque raises and send torque totally to the application form. We believe that clients will appreciate our equipment reducer to accomplish their demand. Just visit EP, you can obtain more information regarding servo gearheads, servo gearboxes, and equipment reducers. We continue to keep in the years ahead for your support.
Plug the Speed Reducer in to the desired channel of your receiver, and connect the lead from your servo (or servo wye) into the man servo lead coming from the circuit table. The arranged screw on the blue trim pot, located close to the top of the main circuit board, is utilized to control the acceleration of the servo. Change the set screw completely clockwise (CW) for normal servo speed without speed reduction, fully counter-clockwise (CCW) for optimum speed reduction, or any place in between for partial acceleration reduction. The reddish LED indicates three feasible conditions: Slower Blinking = No Signal; Solid On = No Swiftness Decrease; Fast Blinking = Reduced Acceleration Setting
Please note that if you make any change to the speed setting as the receiver is on, you need to cycle power to the receiver (convert if off and back on) for the brand new speed setting to take impact. This circuit may also be utilized in conjunction with this Servo Reverser to cause flap or retract servos to carefully turn in opposing directions for correct function. Guidelines are included for easy installation and use.
IMPORTANT NOTE: This device will only work on a regular, proportional servo. You won’t focus on a retract-type servo, as they do not recognize any servo positions other than clockwise (CW) and counter-clockwise (CCW). Retract servos can’t be slowed down, even by a transmitter which includes this function, as their design and electronics don’t allow it. Verify the FAQ page for more information.
This device will reduce the speed of any regular, proportional servo. Connect it between your receiver and the servo (or servos) you intend to control for a far more scale-like motion of flaps or retracts. Adjustable, it could be set to lessen the acceleration of your servo from super-slow motion to no speed decrease at all, with an almost infinite amount of positions in between. Maximum reduction period for a servo to visit 90 degrees is approximately 14 seconds, minimum period (no reduction) is simply the normal swiftness of the servo. Great for reducing or getting rid of the inclination of a plane to “balloon up” when flaps are deployed. It can be utilized to control more than one servo by usage of a normal servo Y.
This is actually the new regulated version that can be used on radio systems powered by any size or kind of battery, including 4.8-6.0 volt 4-5 cell Ni-Cad/Ni-MH electric batteries, and HV (high voltage) receivers that are powered by 2-cell 6.6-8.4 volt Li-Po/Li-Ion/Existence batteries. This unit won’t reduce the voltage going to your servos.
The EP Gear Reducer may be the perfect solution for servomotor applications such as for example packaging machines, gantries, injection molding devices, pick and place, and linear slides.Provided in concentric shaft, correct angle solid shaft, and correct angle hollow shaft styles with modular adaptor flanges and keyless compressible bushings to quickly mount to any manufacturer’s servo electric motor. The EP Series helical gears possess slanted teeth in comparison to spur gears with straight cut teeth, generating a smoother gear mesh, yielding considerably lower noise levels.
The reduced backlash EP planetary servo gear units are made for the 30 to 350 Nm (265 to 3100 lb-in) torque classes. They were designed to combine the greatest possible versatility and cost-efficiency because don’t assume all application requires high-performance parts.
They provide a basis for diverse, dynamic and cost-optimized drive solutions.
The EP planetary servo equipment units can be found in the following versions:
PSC = B5 output, easy output shaft
PSKC = B5 result, with keyway
PSCZ = B14, result, smooth output shaft
PSKCZ = B14 output, with keyway

Like what you found out? Share what you find out about servo gear reducer with your pals and family members by taking them to our website.