Helical Gear Speed Reducers
Provide high-efficiency speed reduction through 1, 2, 3, or 4 pieces of gears. Power is transmitted from a high-rate pinion to a slower-speed equipment. Helical gears usually operate with their shafts parallel to each other. Both most common types are the concentric (insight and result shafts are in range) and parallel shaft (insight and output shafts are offset). Single-stage helical gear reducers are typically used for gear ratios up to about 8:1. Where reduce speeds and higher ratios are required, dual, triple, and quadruple equipment reduction stages may be used.

Worm Gear Speed Reducers
A single reduction acceleration reducer can achieve up to 100:1 reduction ratio in a little package. Referred to as right position right angle worm gearbox drives, these contain a cylindrical worm with screw threads and a worm. With a single begin worm, the worm gear advances only 1 tooth for each 360-degree turn of the worm. So, whatever the worm’s size, the apparatus ratio is the ‘size of the worm equipment to 1′. Higher decrease ratios can be created by using double and triple decrease ratios.

Basic Types of Gearboxes

The objective of a gearbox is to increase or reduce speed. As a result, torque output would be the inverse of the function. If the enclosed drive is definitely a swiftness reducer, the torque result increase; if the drive boosts speed, the torque output will decrease. Gear drive selection factors include: shaft orientation, speed ratio, design type, nature of load, gear rating, environment, mounting position, working temperature range, and lubrication.