Right Position Miter Gearbox Standard Features
Dimensions: right position miter gear drive is 3-21/32″ x 3-15/16″ x 1-1/4″ deep
40% glass filled polypropylene
Weight: 10 ounces
Shafts: Ground high-tensile metal. Any shaft can be utilized as a drive.
Gears: Hardened directly miter gears
Bearings: Hardened metal ball bearings, long term lubrication
Mounting: Three shaft mounting positions provide versatility in application
Versatile: 3 shaft connections are given for versatility in application
RAB-1 could be operated CW, CCW or Back again driven
RAB-1 is rated at 1/3 HP at 1800 RPM. Maximum quickness is 3000 RPM
Benefits and COST BENEFITS
Longer service life
Less wear
Greater tooth-to-tooth contact
Quieter operation
The most effective power transfer design under rated load conditions
Custom Options
Stainless shaft (Make sure you specify series stainless required)
Longer shafts lengths on input and output
2:1 Ratio
Right Angle Drives Made out of Advanced Quality Construction
Ever-Power 2-Way Right Angle Gearboxes transmit power with peaceful, dependable spiral bevel gears. These superior bevel gearmotors feature hardened spiral bevel gears and nonmagnetic stainless-metal shafts. Our Two-Way 90° Gearboxes are also small and feature multiple mounting options. The fully enclosed design guarantees the integrity of the inner gears.
Additionally, the cast aluminum housing of Ever-Power s premium quality Correct Angle 2-Way Gearboxes are created for maximum strength and heat dissipation. The drives can be found with shafts of 3/8”, 1/2″, 5/8” and 3/4″ diameter in both 1:1 and 2:1 ratios. We are able to quote several exclusive types of shafts aswell, including:
Squared
Splined
Extended
Shortened
Stepped
Two Way 90 Degree Gearbox Applications
Ever-Power Right Position Miter Gearboxes are used throughout dozens of industries in hundreds of applications. Any make use of that demands the dependable transfer of velocity or power, you could look for a two-way gearbox bearing the Ever-Power brand. The small design of Ever-Power Two-Way Right-Angle Gearboxes makes them ideal for applications such as for example:
Food Processing Equipment
Ovens & Dryers
Tumbling Barrels
Power Transmission Equipment
Register Controls
Stokers
Case Openers
Paper Rewinders
Test Equipment
Ever-Power Inc, offering the most reliable and reliable transfer of power available. Our company is well known for its innovative designs and producing high-quality movement control solutions designed for engineered functionality and durability. We offer a range of gearbox designs and a wide selection of flexible shaft couplings to supply you with a comprehensive solutions for your mechanical and power transmission applications.
Right Angle Gearbox
Right angle gearboxes are characterized by the actual fact that the drive shaft and the result shaft are arranged at an angle of 90 degrees. Depending on the gearbox type, the axes can intersect in a plane or cross on two parallel planes, which results within an axis offset.
Correct angle gearboxes are recognized with different types of gear teeth or a combination of different gearing types. The most famous single-stage gearbox types are bevel and worm.
Due to the high one stage ratios and the reduced performance level, worm gears can perform a self-locking impact. With worm gears additionally it is possible to have a hollow shaft as the drive shaft.
Bevel gearboxes include various kinds of gearing. Bevel gearboxes with intersecting axes are understood using bevel gearing with directly, helical or spiral the teeth. Hypoid gearboxes possess helical bevel gearing with which the axes cross with an axis offset. The bandwidth of technically practical ratios with which the bevel gear stage can be realized is larger with hypoid gearboxes than with the classical bevel equipment teeth.
Bevel gearboxes can also be combined with various other gearbox types. A regular application in this respect is the mixture with a planetary gearbox, whereby the planetary gearbox could be linked upstream or downstream. This outcomes in a wide range of overall multiplication factors and wide variety of uses in many industrial applications.
The efficiency level of bevel gearboxes is typically less than that of coaxial spur gearboxes, particularly compared to planetary gearboxes. This is because the bevel equipment stage generates a higher degree of axial power and radial force, which has to be absorbed by appropriate bearings. This increases the power loss, which is particularly notable in the drive stage of the gearbox.
The operating noise and the transmittable torques of classic bevel gearboxes are also less than with single spur equipment teeth. Hypoid gearboxes, however, are extremely noisy and may transmit huge amounts of torque, but a considerable amount of bearing load happens in the bevel gear stage of the gearboxes.
In summarizing, a right angle gearbox is usually used when the quantity of installation space in the application form is bound, or an angular arrangement between the drive and the output is required by the application. They are also used in cases where the input shaft must be hollow to be able to business lead through lines or use clamping sets.
The advantages of right angle gearboxes:
Use when set up space is limited
Compact design
Can be combined with other types of gearbox
Quiet and high degree of torque when working with hypoid gearboxes
Version with hollow shaft possible
The disadvantages of right angle gearboxes:
Complex design
Lower efficiency level than planetary gearbox
Noisier
Decrease torques in single-stage ratio range
The Ever-Power, the original right angle gearbox drive, is widely recognized and is in use worldwide. The Ever-Power provides manual or power tranny of rotary motion in a COMPACT, standardized right angle unit.
Our standard type of bevel gearboxes are available from stock in both an ” and Metric Series, one or dual output shafts, 1:one or two 2:1 ratios, and grease lubricated forever and have an operating temperature selection of – 65 degrees F to + 200 degrees F ( – 54 degrees C to + 93 degrees C). Utilizing carburized case-hardened Coniflex* bevel gears, all Ever-Power units utilize totally enclosed & sealed ball bearings.
The cast aluminum housings on our 90 degree gearboxes are precision machined, on our CNC machining center and then coated with a chemical film to protect the materials, and use flanged ends and side bosses for compact installation in a wide range of applications.
The shaft materials used for sizes 1, 2 and 3 is #416 stainless. On the two 2:1 versions, the pinion shaft is certainly carbon steel. For the sizes 4 & 5, the materials is dark oxide carbon metal. Shafts can be provided with particular extensions (with flats, splines, holes, etc.) and /or specific lengths upon ask for.
In addition to your standard models, we will modify our units to meet up your design specifications! Our product sales and engineering departments will be ready to help you with your specific application requirements.
Over the years we’ve received questions about nearly every aspect of the gearbox selection procedure. One of the questions we’ve had a few times is, “What is a right-position gearbox or a right-angle drive?” Or, more specifically, “How is usually a right-angle gearbox or drive different from a velocity reducer or other styles of gearboxes?”
gear-speed-reducer-1-2.png
First, let’s start with some simple terminology. It isn’t uncommon for the terms “gearbox”, “drive” and “rate reducer” to be utilized interchangeably.
A gearbox is any device that uses a gear teach to transmit torque/rpm and whatever uses a gear to transmit torque/rpm is a gearbox.
A right-angle drive is a mechanism with a gear train that may transmit torque/rpm 90 degrees, to carefully turn a corner
A equipment reducer is a system with a gear train that can reduce rpm output. A result of decreasing rpm is increasing torque at the same ratio velocity is reduced.
A gear box can also be a speed increaser
The type of gear used in the gear box defines it as a right angle or an inline drive.
A worm equipment drive is a right-angle drive because is a bevel gear
A spur gear drive is inline
A helical equipment is inline but can also be a right-angle drive
So, exactly what is a right-angle gearbox?
A right-angle gearbox is a gearbox with a right-angle change in direction of the shaft. It’s rather a 1 to 1 1 ratio or a multiple of just one 1 such as for example 2:1 or 15:1. If the ratio is 1:1 it really is a right-position drive. If the ratio is usually greater than 1:1 it is a right-angle quickness reducer.
High torque ball bearing design
Solid one-piece aluminum housing seals gears from outdoors contaminants for smooth operation
Right- or left-hands rotation to convert power either direction
Quickly slides axially along the drive or driven shaft for flexible positioning
Alloy steel helical gears for high performance
Built-in 5 sizes with 3 types of result shaft : hollow, projecting or double-extended. Moreover, yet another output shaft could be installed opposing to the input shaft.
Three input types are available : with projecting input shaft, with pre-designed motor coupling (bell and joint) and pre-engineered COMPACT motor coupling.
Gear unit body in engineering cast iron, EN GJL 200 UNI EN 1561 ribbed internally and externally to guarantee rigidity and machined upon all areas for easy positioning. The single lubrication chamber ensures improved temperature dissipation and better lubrication of all the internal components.
The mechanism of these gearboxes consists of two Ever-Power spiral bevel gears with precision lapped profile, 16CrNi4 or 18NiCrM05 manufactured from steel.
The use of top quality bearings on all of the axis ensures long life to the gearbox and allows high radial and axial loads.
Gearbox casing, flanges, bells and covers are externally painted with BLUE RAL 5010.