Pto Adapter

We are committed to research and advancement of goods that meet the increasingly advanced electronics industry and so are widely used in computers, kitchen appliances, consumer electronics, communications, information, industry, medical and other fields.
We also has patent for 360 degree AC PIN interchangeable type adaptor in fact it is leading the world’s distinctive design.

Ever-Power provides goods which are smaller sized, lighter, more electric power efficient, and simpler to use.
We selling products around the globe and get the certifications for each and every of country. And in addition acquired ISO9001:2015 and ISO 14001:2015 etc. to make sure products meet the latest regulations.
Gear adapters attach between the vehicle transmitting and power take-away, and may serve several purposes. Most commonly, adapters are used to change the direction of rotation of the PTO result shaft. They can even be used to space the PTO out and away from the transmission circumstance. On some imported or non-SAE standard transmissions they allow for the mounting of regular 6-bolt power take-offs. Gear Adapters are available to fit most popular transmissions.
Different body configurations: Can relocate the PTO output shaft to improve clearance for a driveshaft or direct-coupled pump
Alterations PTO shaft rotation: Complements PTO rotation to that of the driven equipment
Standard and non-standard bolt patterns: Fits SAE regular PTOs to non-standard transmissions

• Frame constructed of 1/4″, 3′ x 3″ and 1/4″, 2″ x 2″ metal tubing
• Operates off of skid steer hydraulics
• Requires a minimum of 16 GPM; maximum of 22 GPM (makes 20 to 40 HP off of the power take off)
• No need to modify electric power take off shafts
• Adjustable lower arms
• Reinforced durable universal mounting brackets
• Complete with engine, hydraulic hoses and toned faced couplers
• Ideal for three point power take off devices – snow blowers, mowers, tillers, post hole augers, etc

: Over-running clutches provide a safe means to protect operators and pricey machinery from conditions when the inertia of PTO influenced put into practice exceeds and over-works the tractor PTO acceleration. In such a case, the over-working coupler will free-wheel
smoothly and safely. Over-operating clutches will normally tolerate applications needing up to 65 h.p. at 540 rpm and 100 h.p. at
1000 rpm. Serious shock loads or travel line angularity will certainly reduce this capability
If the length of your PTO does not fit flawlessly within a tractor, a PTO adapter can extend the size without having to replace it for a fresh one. This adapter comes with an overall length of 7-3/16″ with a man end 1-3/8″ x 6 spline and a lady 1-3/8″ x 6 spline end.
Create additional length on the end of your PTO. This tractor PTO shaft adapter features both a lady 6 spline end and a man 6 spline end, each end has a diameter of 1-3/8 in. This enables more connection options and is perfect for anyone that owns a mature tractor since the older parts might not exactly be produced any longer and so are less common.
The over-running coupler is an essential part of PTO travel on rotary mowers, bailers, hay conditioners or any implement where inertia of driven unit could be required to over-run generating source. The coupler drives solidly from tractor to implement and free wheels smoothly when apply exceeds tractor PTO speeds. All measurements are nominal.
Converts a 1 1/8″ keyed spline to a 1 3/8″ 6 spline.
Pto Adapter china Needed with 1000 RPM gearcase upgrade or Three Point Hitch kit for the 25PTOC.
This Small 1000 (21 Spline) to 540 PTO Adapter is the perfect meet for your Shop Dog. It really is conveniently carried in the Shop Dog’s hitchpin and PTO adapter carriers.
This is also a terrific PTO adapter for tractor use. This adapter minimizes the tractor’s PTO from 1-3/8″ x 21 spline to 1-3/8 6 spline (540) and extends the PTO shaft 4-1/8″. It comes with an overall length of 6-3/8″ and is rated for tractors up to 70 HP.