Single and dual reduction planetary gear drives to be used with electric, hydraulic, air flow motors or mechanical power insight from high acceleration, low torque sources to provide reduced speeds at increased torques. The input aspect has regular SAE pads for engine mounting. Obtainable in the three output configurations demonstrated below. Many units could be furnished with an intrinsic parking brake.
One reduction drives are limited to 3500 RPM input; double reduction drives to 5000 RPM. Units with essential parking input swiftness is limited to 2500 RPM.The same torque comes in either direction of rotation. Torque rankings are intermittent. For continuous operation reduce torque rankings to about 1/3 to 1/2 the values shown. Devices provide 95% power transmitting efficiency.

Wheel Drive
Input side has regular SAE pads and splined input. Output part has hub for installation automobile wheel. Free wheel can be done by using the spring disconnect to disengage the drive shaft. The disengage feature is usually regular on all wheel drives.

Shaft Output
Input side hydraulic planetary drive standard SAE pads with splined input. Output side choices include: Keyed round, hexed, hollow, tapered or splined shaft.

Spindle Drive
Input side is standard SAE pads with splined insight. Output side has a flanged spindle for coupling to the load.

Swing Drives
Ever-Power model 6 emerges with or without integral parking brakes. The “SW” Power Wheel offers extra-huge tapered roller bearings, a ductile iron hub and warmth treated ring equipment to minimize backlash growth caused by wear. The external bearing nut provides the supreme in shaft retention and shaft power. Output could be a spindle shaft or numerous sizes of essential pinion gears.