Single and double reduction planetary gear Plastic Gear Rack drives to be utilized with electric, hydraulic, air motors or mechanical power insight from high acceleration, low torque sources to provide decreased speeds at increased torques. The input aspect has regular SAE pads for motor mounting. Obtainable in the three result configurations demonstrated below. Many units could be furnished with an intrinsic parking brake.
Solitary reduction drives are limited by 3500 RPM input; double reduction drives to 5000 RPM. Units with essential parking input swiftness is limited to 2500 RPM.The same torque is available in either direction of rotation. Torque rankings are intermittent. For continuous operation reduce torque ratings to about 1/3 to 1/2 the values shown. Products provide 95% power transmission efficiency.

Wheel Drive
Input side has standard SAE pads and splined input. Output part has hub for installation automobile wheel. Free wheel is possible by using the spring disconnect to disengage the drive shaft. The disengage feature is regular on all wheel drives.

Shaft Output
Input side standard SAE pads with splined input. Output side options include: Keyed circular, hexed, hollow, tapered or splined shaft.

Spindle Drive
Input side is regular SAE pads with splined insight. Output side includes a flanged spindle for coupling to the strain.

Swing Drives
Ever-Power model 6 emerges with or without essential parking brakes. The “SW” Power Wheel has extra-large tapered roller bearings, a ductile iron hub and warmth treated ring equipment to minimize backlash growth due to wear. The external bearing nut supplies the ultimate in shaft retention and shaft power. Output could be a spindle shaft or numerous sizes of essential pinion gears.