greenhouse gear motor

• Electric motor gearboxes are maintenance-free, small power resources for driving vent, display screen, home and flap ventilation systems in greenhouses.
• Single phase and 3 phase choices for your individual needs.
• Key feature of the drives certainly are a self-braking worm gear transmission and a built-in linear limit switch device.
shaft-mounted gear motors are total electromechanical drives where the speed of the installed electrical motor is decreased to the desired value using two to four reduction stages. The drives are powerful and durable and show a concise and lightweight design.

The compact design is made possible through the combination of a spur/worm gear drive with motors optimized for performance. motors also feature a 60 to 70 percent weight reduction compared to commercially available drive motors. This is attained through the constant application of aluminum die casting technology, which ensures a high amount of rigidity for the apparatus and motor housing simultaneously.

Each drive is produced and tested specifically for every order and customer. A sophisticated modular system permits an excellent diversity of types and a optimum amount of customization to client requirements.

Because of their integrated control products, the shaft-mounted equipment motors will be the ideal drives for applications in reversing setting. In both rotation directions, described end positions are safeguarded by two placement limit switches. This uncomplicated solution does not only simplify the cabling, but also makes it possible to configure the finish positions efficiently. The high shut-off precision of the limit switches ensures safe operation moving forwards and backwards.
This gearmotor integrates a gearbox, an electric motor, and limit switches. It is connected with a steel shaft to carefully turn the pinions for greenhouse ventilation. With the support of electric panel, it can run and stop after set amount of turns. Then it can open and close the home windows for greenhouse ventilation to correct positions.
To keep up the delicate environment inside a greenhouse, environment control systems are a necessity. Numerous mechanical systems could be applied in this respect; however cup vent drive systems have a tendency to be the most famous. The drive system consists of a central gearmotor linked to a 40:1 correct angle reducer with dual result shafts. These OP shafts connect to long jack shafts that spread across the roof type of the greenhouse connecting to multiple rack and pinion mechanisms that open and close large glass windows panes in the ceiling for temperature control.
According to the size of the application form (length of the shafting, quantity and weight of the windows panes) we provides two gearmotor solutions from a modified edition of their 200 series parallel shaft line – 1/5 HP and 1/20 HP. The application Is generally intermittent used; however the motors are rated continuous because the glass pane windows may potentially be under constant, subtle adjustment throughout the day.
Gear Motor, also known as Motor Gearboxes, is a particular kind of electrical motor that’s designed to create high torque whilst maintaining a minimal horsepower, or low speed, motor output. Gear motors can be found in many different applications, specifically for the greenhouse, livestock and agricultural market, our motors can be found options to use roof vents, wall vents,roof shading and screening, they put on the shaft with chain couplings that compensate for alignment errors and can be very easily taken out without disturbing the entire shaft.
shaft-mounted gear motors are total electromechanical drives where the speed of the installed electrical motor is decreased to the required value using two to four reduction stages. The drives are high performance and durable and show a compact and lightweight design.

See our internet site for even more articles like this regarding greenhouse gear motor.