Agricultural Gearbox
The agricultural gearbox is the main mechanical component of the kinematic chain of agricultural machines. It really is normally powered by the tractor power take-off via the PTO shaft and the gearbox drives. The operating torque can also be transmitted to the gearbox by hydraulic motors or belt pulleys, in addition to chain gears.
Agricultural gearboxes will have 1 input shaft and at least one output shaft. If these shafts are positioned at 90° to one another, the gearbox can be an ORTHOGONAL ANGLE gearbox or more generally called a right-angle gearbox.

rotary tiller gearbox is certainly adopted middle gear transmission program, mounted with the tractor of 12-80HP. Tractor wheel tracks are completely protected after tillage as the working width is a lot wider. The quality is dependable and the efficiency is well. So that it can be utilized on dried out and paddy field. It can decrease the time, laboring, and price, etc. during operation

Increasers and Reducers
When the gearboxes have both gears with different numbers of teeth.
The gearbox is a reducer when the driving gear, i.e. the one with the insight shaft, gets the fewer quantity of teeth (pinion), thus the result shaft rotates slower compared to the input shaft.
It is named an increaser when the insight shaft is mounted on the apparatus with the larger amount of teeth (crown), thus the output shaft rotates faster compared to the input shaft.
Right-angle gearboxes, distributors or rotational invert gearboxes
When the gearboxes have gears with the same number of teeth.
The gearbox is called right-angle when it only has two shafts (input and output),
whereas it is called a distributor whenever there are at least two output shafts.
It is called a rotational invert gearbox and parallel offset in the versions with parallel shafts with two gearboxes.

Speed change
in addition to the main couple of gears and relevant shafts, the gearboxes may also have additional gears with a different number of teeth. The apparatus shift of the primary couple of gears with the secondary types allows different speeds. The manual switch of the secondary gear set with gears with different quantity of teeth allows adjustments to the output rotation speed.
CMR GROUP can design and produce also agricultural machinery applications.