Drive sprocket

A chain and sprocket drive is a kind of power transmission when a roller chain engages with two or more toothed wheels or sprockets, used in engines as a drivefrom crankshaft to camshaft.
Ever-ability is proud to stock a wide selection of Sprockets along with this huge variety of agriculture, gardening, cooking and outdoor goods. We stand behind all 26,000 products we sell with this Satisfaction Guarantee. CUSTOMER SUPPORT may be the cornerstone of us business, and has been for over 50 years.
Ever-power drive sprockets provide durable, reliable service and show replaceable tooth plates for easy field maintenance. Tooth plates for 102 and 142 series chain can be found with a segmental/symmetrical reversible tooth profile. The 142 DBL, TPL plus the 175 and 260 series use our nonsymmetrical profile.
Drive sprockets weren’t always made to be bolted upon. At one time they were welded onto the ultimate drive motor and had to be minimize off if they were replaced. At some point, welded-on adapters were set up that allowed the sprocket to always be bolted on, and more modern designs use the bolted approach altogether.
When someone sends in your final drive motor for us to take a look at or?rebuild/reman, we advise them to eliminate the sprocket. We don’t need the sprocket in place to evaluate the engine and the added excess weight (that can be significant) unnecessarily boosts your shipping costs.
Signs of Sprocket Wear
The teeth on a travel sprocket are where you look for wear . They must be tall and smooth towards the end, not sharpened or dished at the end. And the sprocket, and even more specifically its teeth, begin to wear, its size becomes scaled-down. This causes what is known as a pitch mismatch, where in fact the teeth on the sprocket no more interact with the track backlinks as effectively. This can accelerate the wear of the sprocket and reduce the efficiency of your devices.
If your sprocket shows sign of excessive wear, then its time to replace it before it starts to cause abnormal track wear or begins to negatively affect the performance of your final drive engine.
Preventing Sprocket Wear
One of the key methods to prevent accelerated sprocket dress in is to check on the track stress. If the tension is too tight, it will cause have on on the sprocket the teeth. We’ve talked before about the importance of keeping the undercarriage clean, and the health of the undercarriage make a difference the track tension (particularly if there is normally a build-up of dried mud and particles). That’s section of the explanation we put so much emphasis on keeping the undercarriage clean
With out a functioning drive sprocket, your track drive won’t manage to propel your machine. Fortunately, there are methods to help your travel sprocket last longer: keep the track stress at an effective level and retain your undercarriage clean.
The undercarriage of your track machine should be inspected regularly. If you find early wear or damage to your tracks, a donned sprocket may be the cause.
15 cogs / teeth
16.77 inches in diameter
12 equally spaced bolt holes
Fits the next Bobcat Compact Track Loaders: T180, T190, T550, T590
Parts can vary according to your serial number.
All Ever-electrical power sprocket tooth profiles are induction hardened to 55 Rockwell C., and so are replaceable. The substitute and protection of tooth plate segments does not require removing of the drive shaft, bearings, etc. Ever-power also designs customized split hub components for retrofit applications that minimize field labor costs.
At 1st glance, you might think that if you’ve seen one travel sprocket, you’ve seen them all. However, Ever-electrical power offers added an I.D. lip and spiral ring that captivate the needle bearing along with an exterior snap ring that enhances performance and dependability. While easy to overlook, it’s this attention to detail that the racer provides come to anticipate from Ever-power.
An I.D. lip and spiral ring that captivate the needle bearing
Exterior snap ring caps sprocket in drum & increases durability
CNC-machined teeth include a corrosion-resistant finish
Chain Type: #219
Tooth Configuration: Standard