Worm Gear Quickness Reducers: Double Reduction
Ever-Power. manufacturers double reduction Worm Gear reducers that are built to last. Double lowering units are made with the same top quality elements as the single decrease Worm Gear reducers.
Double Reduction Worm Gear Acceleration Reducer Features
Cost effective
High Reduction: 75:1 – 3600:1 and higher
C-face input or stable shaft input
Mix of two single reduction reducers
Solid or hollow output double reduction gear reducer shafts available
Several varieties of bolt-on bases available
Substantial tensile strength cast bronze worm wheel and a hardened and surface alloy steel worm made integral with the shaft for lengthy and trouble-free life
All cast iron construction
9 Versions: I, IC, IS, ICS, IM, IMS, ISF, ICSF, IMSF
Double Reduction Worm Gear Velocity Reducer Applications
Conveyors
Packaging Machinery
Cranes/ Hoists/Winches
Mixers/ Agitators
Shipping & Delivery
JIT delivery
Standard shipping: 3-4 days
Same/next day delivery on stock goods at no additional
cost
Dual reduction gearing mechanism is used in large machinery and automotives where in the speed must be decreased at a needed level. For eg if the insight speed is normally 2000rpm and the output velocity desired is definitely 300rpm a reduction gearing system is used such as a reduction gear field. However in case of double reduction mechanism, the reduction of speed takes place in 2 steps. Primarily the type from the engine shaft includes a pinion mounted on it through couplings. This pinion equipment is then linked to an intermediate gear which is first reduction gear. This gear is then connected to some other low rate pinion on another shaft. This low swiftness pinion is linked to the second reduction equipment which is mounted on the propeller shaft which is the output.
Greaves Double Reduction Quickness Reducers are two stage worm reduction models. A specially designed primary worm lowering unit is integrally mounted on a typical single decrease Greaves worm reducer which forms the second stage. The composite devices provide the most compact and rigid set up for large reduction of speed necessary for slower going machinery. A wide variety of ratios upto 4900:1 is available.
The wormshafts are constructed of high quality case hardening steeL accurately generated, ground and superfinished. The wormwheels comprise of phosphor bronze centrifugally cast rims of considerable sections welded to rigid centres. Considerable flexibility of shaft layout is definitely permissible with all types of Double Reduction units
Ever-Power Double Decrease Worm Gearboxes will be two stage worm reduction units.
A especially designed primary worm lowering unit is integrally mounted upon a standard single decrease AGNEE worm gearbox which forms the next stage. The composite units provide the most small and rigid set up for large reduced amount of speed necessary for slow moving machinery. A wide selection of ratios up to 4900:1 is readily available.
Double Decrease Worm Gear Box Sizes Available with us are 40, 50, 60, 75, 85, 100, 125, 150, 175, 200, 250, 300, 350, 430.
Nominal Gear Ratios: 100:1, 150:1, 200:1,300:1, 400:1, 600:1, 750:1, 1000:1, 1200:1, 2000:1, 2800:1
Nominal ratios listed are a typical selection of commonly used ratios from the entire range of Ever-Power Double Reduction Worm Gear Box. Details of other ratios on request.
Under Driven / Over Driven / Vertical Input or Output Shaft Version / Shaft Mounted Version / All types with motor mounting adaptor /
motor – optional
The worm shafts are made of high quality case hardening steel, accurately generated, ground and super finished. The worm wheels include phosphor bronze centrifugally cast rims of substantial sections welded to rigid centers. Considerable versatility of shaft layout can be permissible with all types of Double Reduction units.
Product Description
The products are widely applied in the generating equipments of all kinds of industries domestic and overseas. They will be the best choices for nowadays modern services of mechanical reducing travel control to know large twisting distance, huge gear ratio, low sound, high proficiency and low temperature.
Description:
Customized high quality double worm gear swiftness reducer aluminium gearbox decrease gearbox with electric motor
Ratio:
7.5,10,15,20,30,40,50,60
Color:
Blue, Silver Or when customer’s requirements
Noise:
low noise (<50DB)
Advantage:
Large Efficience and low noise and low temperature
Material:
Housing: Die-Cast Aluminum Alloy
Worm Gear-Bronze 9-4#
Worm-20CrMnTi with carburizing and quenching, surface area harness is 56-62HRC
Shaft-chromium steel-45#
Packing:
Carton and Wooden Case
Bearing:
C&U Bearing
Seal:
NAK SKF
Warranty:
One Year
Input Power:
0.06kw, 0.09kw, 0.12kw, 0.18kw, 0.25kw, 0.37kw, 0.55kw, 0.75kw, 1.1kw, 1.5kw, 2.2kw, 3kw, 4kw, 5.5kw, 7.5kw, 11kw, 15kw
Usages:
Industrial Machine: Food Stuff, Ceramics, Chemical, Packing, Dyeing,
Wood working, Glass.
IEC Flange:
56B5, 56B14, 63B5, 63B14, 71B5, 71B14, 80B5, 80B14, 90B5, 90B14, 100B5, 100B14, 112B5, 112B14, 132B5, 160B5
Lubricant:
Synthetic & Mineral